Lenovo ThinkSystem SE360 V2 Manual page 71

User Action:
Complete the following steps until the problem is solved:
1. Make sure that the XCC/BMC manegment network cable is connected and the network ports is
active.
2. Make sure that there is a DHCPv6 server on the network that can assign an IP address to the XCC/
BMC.
3. If problem persists, collect Service Data log.
4. Contact Lenovo Support.
• FQXSPNM4033I: Telnet port number changed from [arg1] to [arg2] by user [arg3].
A user has modified the telnet port number
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0061
User Action:
Information only; no action is required.
• FQXSPNM4034I: SSH port number changed from [arg1] to [arg2] by user [arg3].
A user has modified the SSH port number
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0062
User Action:
Information only; no action is required.
• FQXSPNM4035I: Web-HTTP port number changed from [arg1] to [arg2] by user [arg3].
A user has modified the Web HTTP port number
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0063
User Action:
Information only; no action is required.
• FQXSPNM4036I: Web-HTTPS port number changed from [arg1] to [arg2] by user [arg3].
A user has modified the Web HTTPS port number
Severity: Info
Serviceable: No
.
Chapter 2 XClarity Controller events
67