Lenovo ThinkSystem SE360 V2 Manual page 179

Information only; no action is required.
• FQXSFPU4043G: TPM Firmware update aborted. System is rebooting...
Severity: Warning
User Action:
Information only; no action is required.
• FQXSFPU4044I: The current TPM firmware version could not support TPM version toggling.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4046I: TPM Firmware will be updated from TPM1.2 to TPM2.0.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4047I: TPM Firmware will be updated from TPM2.0 to TPM1.2.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4049I: TPM Firmware update successful.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4050G: Failed to update TPM Firmware.
Severity: Warning
User Action:
Complete the following steps:
1. Clear TPM via TPM operation and retry TPM firmware update by following the instructions in your
product user guides. Go to https://thinksystem.lenovofiles.com/help/topic/com.lenovo.thinksystem.
common.nav.doc/portfolio.html and click your product link. Usually, the TPM update information is
located in "System board replacement" section in "Hardware replacement procedures".
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU4051G: Undefined TPM_POLICY found
Severity: Warning
User Action:
Complete the following steps:
1. Reboot the system.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU4052G: TPM_POLICY is not locked
Severity: Warning
. 175
Chapter 3 UEFI events