Lenovo ThinkSystem SE360 V2 Manual page 150

Table of Contents

Advertisement

Severity: Warning
User Action:
Complete the following steps:
1. Reboot the system.
2. Reflash the adapter firmware.
3. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFDD0007G: Security Key Lifecycle Manager (SKLM) IPMI Error.
Severity: Warning
User Action:
Complete the following steps:
1. Check Lenovo Support site for an applicable service bulletin or UEFI firmware update that applies to
this error.
2. A/C cycle the system.
3. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFDD0008I: Self-Encrypting Drive (SED) Error: recovered from failure to get key.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFDD0008K: Self-Encrypting Drive (SED) Error: failed to get key.
Severity: Error
User Action:
Complete the following steps:
1. Check key from SKLM server, KMIP server or local security chip.
2. If using SKLM server or KMIP server, perform following actions:
a. Check network connection between SKLM/KMIP and system.
b. Check configuration on SKLM/KMIP server.
c. Check configuration on XCC website.
d. DC cycle the system.
3. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFDD0009I: Self-Encrypting Drive (SED) Error: recovered from failure to access drive [arg1].
Severity: Info
User Action:
Information only; no action is required.
• FQXSFDD0009K: Self-Encrypting Drive (SED) Error: failed to access drive [arg1].
Severity: Error
User Action:
Complete the following steps:
1. Check that SED drive and cable are connected.
146
ThinkSystem SE360 V2 Messages and Codes Reference

Advertisement

Table of Contents
loading

This manual is also suitable for:

7damThinksystem se360

Table of Contents