Lenovo ThinkSystem SE360 V2 Manual page 142

Table of Contents

Advertisement

Table 3. Events organized by severity (continued)
Message String
Event ID
FQXSFIO0006I
An inter-board UPI has been disabled on the link between processor
[arg1] port [arg2] and processor [arg3]port [arg4] because of UPI
topology downgrade.
FQXSFIO0015I
IFM: System reset performed to reset adapters.
FQXSFIO0018I
IFM: Configuration too large for compatibility mode.
FQXSFIO0020J
PCIe Isolation has occurred in PCIe slot [arg1]. The adapter may not
operate correctly.
FQXSFMA0001I
DIMM [arg1] Disable has been recovered. [arg2]
FQXSFMA0002I
The uncorrectable memory error state has been cleared.
FQXSFMA0006I
[arg1] DIMM [arg2] has been detected, the DIMM serial number is
[arg3].
FQXSFMA0007I
[arg1] DIMM number [arg2] has been replaced. [arg3]
FQXSFMA0008I
DIMM [arg1] POST memory test failure has been recovered. [arg2]
FQXSFMA0009I
Invalid memory configuration for Mirror Mode has been recovered.
[arg1]
FQXSFMA0010I
Invalid memory configuration for Sparing Mode has been recovered.
[arg1]
FQXSFMA0011I
Memory population change detected. [arg1]
FQXSFMA0012I
The PFA of DIMM [arg1] has been deasserted.
FQXSFMA0013I
Mirror Fail-over complete. DIMM [arg1] has failed over to to the
mirrored copy. [arg2]
FQXSFMA0014I
Memory spare copy initiated. [arg1]
FQXSFMA0015I
Memory spare copy has completed successfully. [arg1]
FQXSFMA0026I
DIMM [arg1] Self-healing, attempt post package repair (PPR)
succeeded at Rank [arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] on
Device [arg6]. [arg7]
FQXSFMA0027I
Invalid memory configuration (unsupported DIMM Population)
recovered.
FQXSFMA0029I
The PFA of DIMM [arg1] has been deasserted after applying PPR for
this DIMM. [arg2]
FQXSFMA0046I
DIMM [arg1] is Intel Optane PMEM and its volatile or non-volatile
capacity will be inaccessible because that configuration mode is not
supported on current platform.
FQXSFMA0052I
DIMM [arg1] has been disabled due to the error on DIMM [arg2].[arg3]
FQXSFMA0053I
DIMM [arg1] re-enabled due to memory module combination
updating.
FQXSFMA0065I
Multi-bit CE of DIMM [arg1] has been deasserted after performing
post package repair. DIMM identifier is [arg2].
FQXSFPU0020I
The UEFI firmware image capsule signature is invalid.
FQXSFPU0021I
The TPM physical presence state has been cleared.
138
ThinkSystem SE360 V2 Messages and Codes Reference
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational

Advertisement

Table of Contents
loading

This manual is also suitable for:

7damThinksystem se360

Table of Contents