Passwords; Web Server; Trusted Servers - Snom HD100 Configuration Manual

3.4.5.1 Passwords

You can set the administrator password and user password on the Web Portal or by using
provisioning.
To change the admin password:
1.
Enter the old password (for a new HD10X, the default password is admin).
2.
Enter and re-enter a new password. The password is case sensitive and can consist of both numbers
and letters (to a maximum of 15 characters).
3.
Click SAVE.

3.4.5.2 Web Server

You can set the administrator password and user password on the Web Portal or by using
provisioning.
Setting
HTTP Server Port
Enable Secure
Browsing
HTTPS Server port
To configure Web Server Settings:
1.
Enter the HTTP Server port number. The default setting is 80.
2.
Enable or Disable Secure Browsing. When enabled, the HTTPS protocol is used, and you must select
the HTTPS server port in the next step.
3.
Enter the HTTPS server port number. The default setting is 443.
 Note: Changing the Web Server settings will reboot the HD10X.

3.4.5.3 Trusted Servers

The Trusted Servers setting provides a means of blocking unauthorized SIP traffic. When enabled, each
account's Registration server, SIP server, Outbound Proxy server and Backup Outbound Proxy server will
be used as sources for trusted SIP traffic. All unsolicited SIP traffic (for example, INVITE, NOTIFY,
unsolicited MWI, OPTIONS) will be blocked unless it is from one of the trusted servers with the enabled
Description
Port used by the HTTP server.
Set the server to use the HTTPS protocol.
Port used by the HTTPS server.
- 50 -
SIP Phone Configuration Guide