3.2.1.7 Caller Identity Settings
Setting
Source Priority 1
Source Priority 2
Source Priority 3
3.2.1.8 Audio Settings
Setting
Codec priority 1
Codec priority 2
Codec priority 3
Codec priority 4
Codec priority 5
Codec priority 6
Codec priority 7
Enable voice
encryption (RTP)
Enable G.729 Annex B When G.729a/b is enable, select to enable G.729 Annex B, with voice activity
Preferred Packetization
Time (ms)
DTMF Payload Type
Caller Identity
Source Priority 1:
Source Priority 2:
Source Priority 3:
Description
Select the desired caller ID source to display on the incoming call screen:
"From" field, RPID (Remote-Party ID) or PAI (P-Asserted Identity) header.
Select the lower-priority caller ID source.
Select the lowest-priority caller ID source.
Description
Select the codec to use first during a call.
Select the codec to use second during a call if the previous codec fails.
Select the codec to use third during a call if the previous codec fails.
Select the codec to use fourth during a call if the previous codec fails.
Select the codec to use fifth during a call if the previous codec fails.
Select the codec to use sixth during a call if the previous codec fails.
Select the codec to use seventh during a call if the previous codec fails.
Select to enable secure RTP for voice packets.
detection (VAD) and bandwidth-conserving silence suppression.
Select the packetization interval time.
Set the DTMF payload type for in-call DTMF from 96-127.
SIP Phone Configuration Guide
PAID
RPID
From
- 15 -