SIGNIFY EA2327 Instruction Manual page 23

Instructions (cont.)
NOTE: When listening to tracks via Bluetooth
the Radio and the Bluetooth
because without doing this, you may not be able to hear any sound at all. Please ensure this is checked.
Disconnecting the Bluetooth
To end the connection between the Bluetooth
1. Short press the MODE button to enter a different audio mode; or
2. Long press the STANDBY button twice to power off; or
3. Slide the ON/OFF switch (located on the back of the Radio), to the OFF position to turn the Radio off; or
4. On the Bluetooth® enabled device, select 'EA2327' and then 'Disconnect' or 'Forget This Device'; or
5. Simply turn the Bluetooth® function OFF on the Bluetooth® enabled device.
Automatically Reconnecting the Bluetooth
If your Bluetooth enable device was previously paired to the Radio and Bluetooth
®
as the audio source on the Radio, then the Radio may automatically reconnect to the Bluetooth
device. If this does happen, the Bluetooth
LCD display screen on the Radio will display 'BT Connected'. This will mean that the audio on the Bluetooth
enabled device can now be streamed through the Radio immediately.
IMPORTANT: If the LCD display screen displays 'BT Connected', this means that the last connected device
is within the Bluetooth® reception range of the Radio. You will not be able to pair a new device until the
previously connected device has been disconnected. You will need to turn off the Bluetooth® connection
on the last connected device in order to connect to a new device. Please see the instructions above for
how to disconnect a 'BT Connected' device.
Automatic reconnection will ONLY happen if:
1. The Bluetooth® enabled device was the last device that the Radio was connected to.
2. The Bluetooth® enabled device has maintained 'EA2327' as one of its paired devices, the device should
display a list of paired devices in the Bluetooth® menu or settings.
3. The Bluetooth® enabled device and the Radio are in close proximity to one another. Generally, Bluetooth®
is only operable over an unobstructed distance of approximately 10 metres.
Tips for Operating Bluetooth
1. When pairing the Radio with your Bluetooth® enabled device, please place the Bluetooth® enabled device
as close as possible to the Radio.
2. The Bluetooth® connection may not work well due to the below:
• There is an obstacle between the Radio and the Bluetooth® enabled device.
• There is a device using the same Bluetooth® frequency as the Radio such as medical equipment,
microwave ovens or wireless LAN devices.
• Pairing is limited to one Bluetooth® enable device. Multi-pairing is not supported.
AFTER SALES SUPPORT
1300 777 137
, always be aware that you may need to adjust the volume on both
®
enabled device to reach the required volume level. This is EXTREMELY important,
®
Enabled Device
®
enabled device and the Radio, follow the steps below.
®
enabled device will display as being connected to 'EA2327' and the
®
Connection
®
MODEL: EA2327 PRODUCT CODE: 712283 04/2023
Enabled Device
®
is selected once again
®
enabled
®
service@unclebills.com.au
®
23