Dab+ Mode - SIGNIFY EA2327 Instruction Manual

Instructions (cont.)

DAB+ Mode

The Radio features a built-in DAB+ (Digital Audio Broadcasting) tuner, auto-scan function, and a large 40 station
preset memory, allowing you to listen to the digital radio stations within the VHF Band III available in your location.
In this mode, the LCD display screen will display information about the digital radio station, music title, and more.
NOTE: When playing a radio station, the LCD display screen normally displays the name of the current
station with other related information.
1. Short press the MODE button to cycle through the audio modes until 'DAB' displays on the LCD display screen.
2. If DAB+ mode has been used before, the station last listened to will display on the left hand side of the
LCD display screen and play automatically. If this is the first time that DAB+ mode is used, or the Radio has
been turned off, a quick scan of all available DAB+ channels within the VHF Band III will be carried out as
soon as the unit is set to DAB+ mode.
3. To perform a full automatic scan, long press the SCAN button and the Radio will automatically start
searching for all available DAB+ stations. Once the scan is complete all available radio stations will be
stored in the Radio in alphabetical order.
NOTE: An alternate way to carry out a full automatic scan is to long press the MENU button, while in DAB+
mode, till 'Menu <Scan>' displays on LCD display screen, and then short press the ENTER button.
NOTE: You can use this function to refresh your channel list or to scan for newly available stations.
NOTE: If the station list is still empty after the scan, the LCD display screen will display 'DAB No Station!'. If no
stations are found it may be necessary to relocate your Radio to a position that has better reception and/or
adjust the Radio antenna. Check your reception coverage in your area by visiting:
https://www.digitalradioplus.com.au/can-i-get-digital-radio and entering your postcode. This Radio is suitable
for areas with good reception. If your address does not have good reception, you may not be able to pick up all
digital stations with this Radio.
4. Short press the TUNE + or TUNE - button to highlight the current DAB+ station. Then use quick short
presses of the TUNE + or TUNE - button to cycle through the available DAB+ stations. Press the ENTER
button to confirm your selection.
5. To exit DAB+ mode, short press the MODE button and cycle through the different audio modes until you
have reached the mode you desire.
NOTE: Short press the INFO button to cycle through current station information such as current song, signal
strength, program type (style or genre), episode name, channel number and frequency, signal error rate, audio
bit rate, time and date.
Manual Tune
Unlike AM/FM transmission, DAB+ transmits several stations on a single channel/frequency. While performing
an automatic scan, if a station has been missed or you encounter poor reception, try manual tuning.
AFTER SALES SUPPORT
1300 777 137
18
MODEL: EA2327 PRODUCT CODE: 712283 04/2023
service@unclebills.com.au