Adjusting The Volume; Adjusting The Lcd Display Screen Brightness And Timeout - SIGNIFY EA2327 Instruction Manual

Instructions (cont.)
French (Le français), Norwegian (Norsk språk), Italian (Lingua italiana), Swedish (Svenska), Danish (Dansk), Polish
(Polski) and Finnish (Suomi). Short press the ENTER button to confirm your selection.
7. Short press the MENU button (multiple times if required) to return to the current audio source.

Adjusting the Volume

1. To increase the volume, turn the VOLUME control dial clockwise on the main unit.
2. To decrease the volume, turn the VOLUME control dial anticlockwise on the main unit.
3. To mute the volume, press the MUTE button once.
4. To unmute the volume, press the MUTE button once again.
NOTE: Do not turn the VOLUME control dial in an extremely fast motion. It is best to turn it slowly for more
accurate volume control selection.
NOTE: While using the Radio in BT (Bluetooth
volume on your Bluetooth
WARNING: Check the volume level before playing music to prevent children, those who are infirm, or
pregnant women, from being shocked by the sudden and loud sound emitted from the Radio.
IMPORTANT: Using the Radio for an extended period at high volumes can cause the Radio to overheat and
may cause damage to the internal components. Do not operate the Radio at a high volume for extended
periods of time.

Adjusting the LCD Display Screen Brightness and Timeout

You can adjust the brightness of the LCD display screen. Simply follow the steps below for how to adjust the
brightness.
1. Enter the standby mode by following the instructions in section 'Power On-Off / Standby Mode' of the
instruction manual (page 10).
NOTE: Please ensure you are in standby mode BEFORE you follow the instructions below. If not, the
instructions below will not be valid.
2. Once in standby mode, long press the MENU button till 'Menu <System>' displays on LCD display screen.
3. Short press the ENTER button to access the 'System' menu.
4. Short press the TUNE + or TUNE - button to cycle through the 'System' menu options.
5. Once 'Backlight' displays on the LCD display screen, short press the ENTER button to confirm your selection.
6. Short press the TUNE + or TUNE - button to cycle between the 'Backlight' menu options. Once
'Level' displays on the LCD display screen, short press the ENTER button to confirm your selection. Short
AFTER SALES SUPPORT
1300 777 137
) mode, you can control the volume by either adjusting the
®
enabled device or turning the VOLUME control dial of the Radio.
®
MODEL: EA2327 PRODUCT CODE: 712283 04/2023
service@unclebills.com.au
15