Alarm Clock Set Up - SIGNIFY EA2327 Instruction Manual

Instructions (cont.)
2. Once in standby mode, long press the MENU button till 'Menu <System>' displays on LCD display screen.
3. Short press the ENTER button to access the 'System' menu.
4. Short press the TUNE + or TUNE - button to cycle through the 'System' menu options.
5. Once 'Time/Date' displays on the LCD display screen, short press the ENTER button to confirm your
selection. 'Set Time/Date' will display on the LCD display screen, short press the ENTER button once again
to confirm your selection.
6. The date will display on the LCD display screen in 'DD-MM-YYYY' format, and 'DD' will flash. Short press
the TUNE + or TUNE - button to cycle through the date options (01-31), once the desired date is displayed,
short press the ENTER button to confirm your selection.
7. Once the date is confirmed, 'MM' will flash on the LCD display screen, short press the TUNE + or TUNE -
button to cycle through the month options (01-12). Once the desired month is displayed, short press the
ENTER button to confirm your selection.
8. Once the month is confirmed, 'YYYY' will flash on the LCD display screen. Short press the TUNE + or TUNE -
button to cycle through the year options. Once the desired year is displayed, short press the ENTER button to
confirm your selection.
9. Once the date has been set, the time will display on the LCD display screen in 'HH:MM' format, and 'HH'
will flash. Short press the TUNE + or TUNE - button to cycle through the hour options (00 hour-23 hours).
Once the desired hour is displayed, short press the ENTER button to confirm your selection.
10. Once the hour is confirmed, 'MM' will flash on the LCD display screen. Short press the TUNE + or TUNE - button
to cycle through the minute options (00 min-59 mins). Once the desired minutes is displayed, short press the
ENTER button to confirm your selection.
11. Once the time and date have been set, short press the MENU button (multiple times if required) to return
to the current audio source.
NOTE: When the Radio is in DAB+ mode, if a DAB+ signal is available, the device will automatically set the
local time and date.

Alarm Clock Set Up

NOTE: You can set up to 2 alarms on your Radio.
1. Enter the standby mode by following the instructions in section 'Power On-Off / Standby Mode' of the
instruction manual (page 10).
NOTE: Please ensure you are in standby mode BEFORE you follow the instructions below. If not, the
instructions below will not be valid.
2. Once in standby mode, long press the MENU button till 'Menu <System>' displays on LCD display screen.
3. Short press the ENTER button to access the 'System' menu.
AFTER SALES SUPPORT
1300 777 137 MODEL: EA2327 PRODUCT CODE: 712283 04/2023
service@unclebills.com.au
11