Fm Mode - SIGNIFY EA2327 Instruction Manual

Instructions (cont.)
3. Short press the TUNE + or TUNE - button to cycle through the available (empty) slots on the LCD display
screen. Once you have reached your desired preset slot, short press the ENTER button to save the DAB+
station in that slot.
4. To recall a saved DAB+ station, short press the PRESET button. Then short press the TUNE + or TUNE -
button to cycle through the list of saved DAB+ stations. Once you have reached your desired station, short
press the ENTER button to confirm your selection.
NOTE: There are 40 DAB+ station preset slots available to save your favorite DAB+ stations. You can save a
station under an empty preset slot, or you can save over an already existing preset slot.
Prune (Deleting DAB+ Stations)
Prune is a feature that deletes stations that are either no longer transmitting or have moved frequency.
1. In DAB+ mode, long press the MENU button till 'Menu <Scan>' displays on LCD display screen.
NOTE: If 'Menu <Scan>' doesn't appear straight away in the Menu, short press the TUNE + or TUNE -
button until it is visible on the LCD display screen.
2. Short press the TUNE + or TUNE - button to cycle through the main menu options.
3. Once '<Prune Invalid >' displays on the LCD display screen, short press the ENTER button to access the
'<Prune Invalid >' menu options.
4. Short press the TUNE + or TUNE - button to cycle between 'No' and 'Yes'.
5. Once 'Yes' is selected, short press the ENTER button to confirm your selection.
6. 'Setup Completed!' will display on the LCD display screen and the Radio has now removed all invalid
stations in this mode.

FM Mode

The Radio features a built-in FM tuner with an auto-tuning function and a large 40 station preset memory that
allows you to save and listen to your favourite FM radio stations.
1. Short press the MODE button to cycle through the audio modes until 'FM' displays on the LCD display screen.
2. Long press the SCAN button to perform an auto-tune from frequency 87.5MHz upwards. Once the scan is
complete all available FM radio stations will be stored in the Radio, and the first station that was found in the
frequency band will start to play.
NOTE: You can use this function to refresh your channel list or to scan for newly available stations.
3. Long press the TUNE + or TUNE - button to scan up or down the frequency band and switch to the next (+) or
previous (-) available FM radio station.
NOTE: Depending on the area the Radio is located, you may need to either adjust the antenna position or
the Radio's location to gain better reception.
AFTER SALES SUPPORT
1300 777 137
20
MODEL: EA2327 PRODUCT CODE: 712283 04/2023
service@unclebills.com.au