Snooze Function; Sleep Timer Set Up - SIGNIFY EA2327 Instruction Manual

Instructions (cont.)
NOTE: You cannot adjust the radio station (FM or DAB+) to set as an alarm tone while in time mode. To
change the radio station alarm tone, return to Radio mode, select the FM radio frequency or DAB+ station
(as applicable) you wish to set as your alarm tone, and return to time mode to set the alarm setting again.
IMPORTANT: If a Radio alarm sound (FM or DAB+) has been selected and the Radio is currently on at the time
the alarm is due to go off, the alarm will activate with the buzzer sound and not the Radio alarm sound.
NOTE: Once you have set up one or both alarms the corresponding alarm symbol will display on the
screen. For 'Alarm 1',
been set, both
1 2

Snooze Function

Once your alarm activates you can snooze it for 5, 10, 15 or 30 minutes. Follow steps below to snooze your alarm.
1. When the alarm (buzzer or Radio) activates, short press any button on the Radio (except the MODE or
MUTE button) once. 'Snooze: 5 minutes' will display on the LCD display screen with '5 minutes' flashing.
Do a quick short press of the ENTER button to select this as the snooze time or leave for few seconds and
'5 minutes' will stop flashing and alarm will activate again after 5 minutes.
NOTE: If the alarm sound activates and you press the MODE or MUTE button the alarm function will be
deactivated.
2. To change the snooze time to 10, 15 or 30 minutes, use short presses of the TUNE + or TUNE - button
when 'Snooze: 5 minutes' is flashing in step 1.
3. To cancel the snooze function, press the MODE or MUTE button.

Sleep Timer Set Up

The sleep function, allows you to listen to the Radio for a selectable period of time, after which the Radio
turns off automatically.
1. Enter the standby mode by following the instructions in section 'Power On-Off / Standby Mode' of the
instruction manual (page 10).
NOTE: Please ensure you are in standby mode BEFORE you follow the instructions below. If not, the
instructions below will not be valid.
2. Once in standby mode, long press the MENU button till 'Menu <System>' displays on LCD display screen.
3. Short press the ENTER button to access the 'System' menu.
4. Short press the TUNE + or TUNE - button to cycle through the 'System' menu options.
5. Once 'Sleep' displays on the LCD display screen, short press the ENTER button to confirm your selection.
AFTER SALES SUPPORT
1300 777 137
will display on screen. For 'Alarm 2',
1
will display on the screen.
will display on screen. If both alarms have
2
MODEL: EA2327 PRODUCT CODE: 712283 04/2023
service@unclebills.com.au
13