Table of Contents
Advertisement
APPENDIx 4. OPTIONAL BLOWER AND THERMODISC INSTALLATION
A blower and a thermodisc, sold separately, can be installed on the stove. Thermodisc allows
the blower to operate only when the stove is hot enough. See the instructions provided with the
blower and the thermodisc for more details.
1.
Remove the backplate by cutting the knockouts with pliers.
2.
Screw the blower (E) in place using the screws (D) included in the installation manual. Screw
the thermodisc (B) with the screws (C) supplied with the thermodisc on the back of the stove.
Ensure that the blower's power cord is not in contact with any surface of the stove to
prevent electrical shock or fire damage. Do not run the power cord beneath the stove.
Installation and Operation Manual - Inspire 2000
E
D
B
C
Page 55
Advertisement
Table of Contents
