Osburn 3300 Owner's Manual
  1. Manuals
  2. Brands
  3. Osburn Manuals
  4. Wood stove
  5. 3300
  6. Owner's manual

Osburn 3300 Owner's Manual

Hide thumbs Also See for 3300:
Table of Contents

Advertisement

Quick Links

Download this manual
OSBURN 3300
(OB03300 model)
CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION REQUIREMENTS
IN LOCAL AREA.
READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS WOOD STOVE. FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH.
READ AND KEEP THIS MANUAL FOR REFERENCE
Printed in Canada
Wood Stove
Owner's Manual
Part 2 of 2
INSTALLATION AND OPERATION
US Environmental Protection Agency
phase II certified wood stove compliant
with 2020 cord wood standard
Safety tested according to CAN/ULC
S627, UL 1482 and UL 737 standards
by an accredited laboratory.
REQUIREMENTS
MOBILE
HOME
46131_IA
2023-03-28

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3300 and is the answer not in the manual?

Questions and answers

Related Manuals for Osburn 3300

Summary of Contents for Osburn 3300

  • Page 1 Wood Stove Owner's Manual Part 2 of 2 INSTALLATION AND OPERATION OSBURN 3300 REQUIREMENTS (OB03300 model) US Environmental Protection Agency phase II certified wood stove compliant with 2020 cord wood standard Safety tested according to CAN/ULC S627, UL 1482 and UL 737 standards by an accredited laboratory.
  • Page 2 If it can not be provided, the warranty period will be determined by the date of manufacture of the product. It is also highly recommended to register the warranty online at https://www.osburn-mfg.com/en/warranty/warranty-registration/ Registering the warranty will help to quickly find the information needed on the unit.

  • Page 3: Table Of Contents

    6.9 Mobile Home Installation ....................38 7. Maintenance/Parts Replacement ..................39 7.1 Replacement ........................39 7.2 Gasket ..........................40 7.3 Door ..........................40 8. Exploded Diagram and Parts List ..................43 OSBURN LIMITED LIFETIME WARRANTY ................46 Installation and Operation Requirements - Osburn 3300 Page 3...

  • Page 4: Certification Plate

    1. CERTIFICATION PLATE Page 4 Installation and Operation Requirements - Osburn 3300...
  • Page 5 Installation and Operation Requirements - Osburn 3300 Page 5...

  • Page 6: General Information

    This appliance is officially tested and certified by an independent agency. Tested and certified in compliance with CFR 40 part 60, subpart AAA, section 60.534(a)(1(ii) and draft ASTM WK47329-14. Carbon monoxide. Page 6 Installation and Operation Requirements - Osburn 3300...

  • Page 7: Specifications

    CAN/CSA- Z240 MH standard. Tested and certified in compliance with CFR 40 part 60, subpart AAA, section 60.534(a)(1(ii) and draft ASTM WK47329-14. Installation and Operation Requirements - Osburn 3300 Page 7...

  • Page 8: Dimensions

    30 3/8" 772mm 27" 686mm 25 1/8" 638mm 18 1/2" 471mm 11 5/8" 295mm 14 1/2" 368mm 25 1/8" 640mm 23 1/2" 598mm Figure 2: Front View Figure 3: Side View Page 8 Installation and Operation Requirements - Osburn 3300...
  • Page 9 2.3.2 Stove Dimensions with pedestal Figure 4: Front View Figure 5: Side View Installation and Operation Requirements - Osburn 3300 Page 9...
  • Page 10 12" 305mm 16" 406mm Figure 6: Door Opening 3/16" 5/16" 14 1/8" 359mm 19" 481mm 21" 535mm Figure 7: Front View - Combustion Chamber Figure 8: Side View - Combustion Chamber Page 10 Installation and Operation Requirements - Osburn 3300...

  • Page 11: Epa Loading Procedure

    See Figures 12 and 13 for an example load for maximum burn rate inside the combustion chamber (illustrative only). Then, place 2 logs in the Installation and Operation Requirements - Osburn 3300 Page 11...
  • Page 12 (3.5 to 4.5 inches of cross section dimensions approximately) in front of the firebox. Page 12 Installation and Operation Requirements - Osburn 3300...
  • Page 13 For optimal medium fire load,take small size fuel pieces (between 2- and 3-inches cross section dimensions approximately) in the back of the firebox and use medium to large size fuel pieces (3.5 to 4.5 inches of cross section dimensions approximately) in front of the firebox. Installation and Operation Requirements - Osburn 3300 Page 13...
  • Page 14 4 and 15 minutes after the loading period. Before closing further, make sure the flame intensity is increasing or stable. Turn ON the blower at minimum speed after 30 minutes. Page 14 Installation and Operation Requirements - Osburn 3300...

  • Page 15: Clearances To Combustible Material

    17 ¾" (451 mm) 17 ¾" (451 mm) The pipe distances listed in this table refer to the distances obtained when the stove is installed in accordance with the appliance clearances above mentioned. Installation and Operation Requirements - Osburn 3300 Page 15...
  • Page 16 48" Flush 48" 36" 122 cm 92 cm Figure 18: Clearances - Top Figure 19: Clearances - Corner 84" 213 cm Figure 20: Clearances - Side Page 16 Installation and Operation Requirements - Osburn 3300...
  • Page 17 6" from combustible materials must be used. Only in this case, the same clearances as a certified double wall pipe connector can be used. The pipe distances listed in this table refer to the distances obtained when the stove is installed in accordance with the appliance clearances above mentioned. Installation and Operation Requirements - Osburn 3300 Page 17...
  • Page 18 19 ¾" (502 mm) 19 ¾" (502 mm) The pipe distances listed in this table refer to the distances obtained when the stove is installed in accordance with the appliance clearances above mentioned. Page 18 Installation and Operation Requirements - Osburn 3300...
  • Page 19 The pipe distances listed in this table refer to the distances obtained when the stove is installed in accordance with the appliance clearances above mentioned. Installation and Operation Requirements - Osburn 3300 Page 19...
  • Page 20 19 ¾" (502 mm) 19 ¾" (502 mm) The pipe distances listed in this table refer to the distances obtained when the stove is installed in accordance with the appliance clearances above mentioned. Page 20 Installation and Operation Requirements - Osburn 3300...
  • Page 21 122 cm 92 cm Les distances de tuyau listées dans ce tableau se réfèrent aux distances obtenues lorsque le poêle est installé en accord avec les dégagements de l’appareil mentionnés ci-dessus. Installation and Operation Requirements - Osburn 3300 Page 21...

  • Page 22: Floor Protection

    The floor protection at the back of the stove is limited to the stove’s required clearance if such clearance is smaller than 8 inches (203 mm). Only required under the horizontal section (Ho) of the connector. Must exceed each side of the connector by at least 2 inches (51 mm). Page 22 Installation and Operation Requirements - Osburn 3300...

  • Page 23: Reducing Wall And Ceiling Clearances Safely

    Mounting hardware must not be located closer than 8" (200 mm) from the vertical centre line of the appliance. G) Edge clearance for ceiling shields to side and back walls: 3" (75 mm) Shield extension beyond each side of the appliance: 18" (450 mm) Installation and Operation Requirements - Osburn 3300 Page 23...
  • Page 24 Figure 22: Heat shield clearances Figure 23: Heat shield clearances Figure 24: Heat shield clearances Figure 25: Heat shield clearances Page 24 Installation and Operation Requirements - Osburn 3300...
  • Page 25 Brick, with a minimum of 24 gauge (0.61 mm) sheet metal backing, spaced out at least 1" (25 mm)* by non-combustible spacers 12" (305 mm) * In Canada this space can be ⅞" (21 mm) Installation and Operation Requirements - Osburn 3300 Page 25...

  • Page 26: Installation Of Options On Your Product

    Remove the door, the firebricks, and the ash plug from the stove, if desired. Put the stove on its back. Remove and dispose of the two freight supports (D). Keep the nuts (C) and washers (B) for step 4. Page 26 Installation and Operation Requirements - Osburn 3300...
  • Page 27 Install the legs (E) on the legs supports (F). Secure with the washers (G) and nuts (H) supplied with the leg assembly. With the nuts (C) and washers (B) removed in step 2, secure both leg assemblies to the stove. Installation and Operation Requirements - Osburn 3300 Page 27...
  • Page 28 (See step 1). The baffle and the bricks must be put back in the right place after the final positioning of the stove. Page 28 Installation and Operation Requirements - Osburn 3300...

  • Page 29: Pedestal Installation

    Remove the door, the firebricks and the ash plug from the stove, if desired. Put the stove on its back. Remove and dispose of the two freight supports (D). Keep the nuts (C) and washers (B) for step 3. Installation and Operation Requirements - Osburn 3300 Page 29...
  • Page 30 See step 1. The baffle and the bricks must be put back in the right place after the final positioning of the stove. Page 30 Installation and Operation Requirements - Osburn 3300...

  • Page 31: Door Overlay Installation

    Position the overlay (A) on the door frame and secure it in place from behind using the nuts (B).To ease the installation, do not tighten the nuts until they are all installed. Note: It is not necessary to remove the glass to install the overlay. Installation and Operation Requirements - Osburn 3300 Page 31...

  • Page 32: Decorative Panels

    Decorative Panels To remove the decorative panel (C), remove the screws (B) and push forward on the panel to unhook it from the bracket (E). Page 32 Installation and Operation Requirements - Osburn 3300...

  • Page 33: Optional Fresh Air Intake Kit Installation

    (HVAC type, must meet ULC S110 or UL 181 class 0 or class 1) (B), sold separately. Refer to air intake kit installation instructions for more details. Installation with legs Installation with pedestal Installation and Operation Requirements - Osburn 3300 Page 33...

  • Page 34: Optional Fire Screen Installation

    Lift the fire screen upwards and push the bottom part towards the stove then let the fire screen rest on the bottom of the door opening. Warning: Never leave the stove unattended while in use with the fire screen. Page 34 Installation and Operation Requirements - Osburn 3300...

  • Page 35: Optional Blower And Thermodisc Installation

    Ensure that the blower’s power cord is not in contact with any surface of the stove to prevent electrical shock or fire damage. Do not run the power cord beneath the stove. Installation and Operation Requirements - Osburn 3300 Page 35...

  • Page 36: Air Tubes And Baffle Installation

    Put the baffle in place. Repeat steps 1 and 2 for the three other tubes. To remove the tubes use the above steps in reverse order. Page 36 Installation and Operation Requirements - Osburn 3300...
  • Page 37 Note that secondary air tubes (B) can be replaced without removing the baffle board (A) and that all tubes are not necessarely identical (look at the part number on the tube). Installation and Operation Requirements - Osburn 3300 Page 37...

  • Page 38: Mobile Home Installation

    For a stove on legs, install a plate (L) on each leg and screw it in place with the proper hardware (M). For a stove on a pedestal, remove the plugs (N) and screw the base on the floor with the proper hardware (O). Page 38 Installation and Operation Requirements - Osburn 3300...

  • Page 39: Maintenance/Parts Replacement

    Reinstall the glass, being careful to centre the glass in the door and not to over-tightening the retaining screw. The two main causes of broken door glass are uneven placement in the door and over-tightening the retaining screws. Installation and Operation Requirements - Osburn 3300 Page 39...

  • Page 40: Gasket

    Remove the split pin by pulling and turning it using pliers. Turn the handle one counterclockwise turn to increase pressure. Reinstall the split pin with a small hammer. Figure 26: Removing the split pin Figure 27: Installing the split pin Page 40 Installation and Operation Requirements - Osburn 3300...
  • Page 41 Using a flat screwdriver, turn the adjustable hinge rods in the direction shown to adjust the doors. Tighten all door hinge pressure screws when they are at the desired positions. Configurations 1-2-3-4-5-6, show in which direction these act on the adjustment of the door. Installation and Operation Requirements - Osburn 3300 Page 41...
  • Page 42 Leave about ½" long of the gasket when cutting and press the end into the groove. Tuck any loose fibers under the gasket and into the silicone. Close the door. Do not use the stove for 24 hours. Page 42 Installation and Operation Requirements - Osburn 3300...

  • Page 43: Exploded Diagram And Parts List

    8. Exploded Diagram and Parts List DETAIL B Installation and Operation Requirements - Osburn 3300 Page 43...
  • Page 44 130 CFM BLOWER WITH VARIABLE SPEED CONTROL (THERMODISC INCLUDED) 44085 RHEOSTAT KNOB 44087 RHEOSTAT NUT 44080 RHEOSTAT WITHOUT NUT (MODEL KBMS-13BV) 60013 POWER CORD 96" X 18-3 type SJT (50 pcs per carton) Page 44 Installation and Operation Requirements - Osburn 3300...
  • Page 45 THREAD-CUTTING SCREW 1/4-20 X 1/2" F HEX STEEL SLOT WASHER C102 ZINC PL72506 FLAME DEFLECTOR 30507 BLACK TORX SCREW WITH FLAT HEAD TYPE F 1/4-20 X 3/4" SE70595 AIR MATE 21594 C-CAST TOP INSULATION Installation and Operation Requirements - Osburn 3300 Page 45...

  • Page 46: Osburn Limited Lifetime Warranty

    Labour cost and repair work to the account of the manufacturer are based on a predetermined rate schedule and must not exceed the wholesale price of the replacement part. Shall your unit or a components be defective, contact immediately your OSBURN dealer. To accelerate processing of your warranty claim, make sure to have on hand the following information when calling:...
  • Page 47 Installation and Operation Requirements - Osburn 3300 Page 47...
  • Page 48 Resale is strictly prohibited. The manufacturer may update St-Augustin-de-Desmaures (Québec) Canada this document from time to time and cannot be responsible G3A 2H3 for problems, injuries, or damages arising out of the use 1-877-356-6663 of information contained in any document obtained from https://www.osburn-mfg.com/en/ unauthorized sources. tech@sbi-international.com...

This manual is also suitable for:

Ob03300

Table of Contents