Operating Your Stove - Osburn OB02042 Installation And Operation Manual

3.1.7 Manufactured Logs

4. Operating Your Stove

This wood heater has a manufacturer-set minimum low burn rate that must not be
altered. It is against federal regulations to alter this setting or otherwise operate this
wood heater in a manner inconsistent with operating instructions in this manual.
Before using the stove, the following steps should be followed :
• Install the minimalist, the steel or the soapstone base. (see
• Install the decorative panels (see
The following steps are optional
• Install the fresh air intake (see
• Install the blower and the thermodisc (See
• Install the refractory slabs (See
• Fold the cold hand support.
Installation and Operation Manual - Inspire 2000
Do not burn manufactured logs made of wax impregnated sawdust or
logs with any chemical additives. Manufactured logs made of 100%
compressed sawdust can be burned with caution in the number of
these logs burned at once. Start with one manufactured log and see
how the stove reacts. Never use more than two manufactured logs.
«Appendix 2. Decorative Panels
«Appendix 3. Optional Fresh Air Intake Kit
«Appendix 4. Optional Blower and Thermodisc Installation»)
«Appendix 6. Optional Refractory Panels Installation»
1
Figure 15: Cold hand support
«Appendix 1. Base Installation»
Installation»)
Installation»)
2
),
)
3
Page 19