Loading Paper And Specialty Media - Lexmark MX931 MFP User Manual

Set up, install, and configure
Setting
Reply Address
SMTP Server Authentication Login / Plain
Device‑Initiated E‑mail
Device UserID
Device Password

Loading paper and specialty media

Setting the size and type of the specialty media
The trays automatically detect the size of plain paper. For specialty media like labels, card stock, or envelopes,
do the following:
1
From the home screen, touch Settings > Paper > Tray Configuration > Paper Size/Type > select a paper
source.
2
Set the size and type of the specialty media.
Configuring Universal paper settings
1
From the home screen, touch Settings > Paper > Media Configuration > Universal Setup.
2
Configure the settings.
Enabling the Multiple Universal Sizes setting
1
From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Tray
Configuration.
2
Enable the Multiple Universal Sizes setting.
Loading the 520-sheet tray
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
1
Pull out the tray.
Note: To avoid jams, do not pull out trays while the printer is busy.
Value
Your e‑mail address
Use Device SMTP Credentials
Your e‑mail address
Account password or app password
Notes:
•
For accounts with two‑step verification disabled, use your account
password.
•
For accounts with two‑step verification enabled, use an app password. To
create an app password, go to the
in to your account, and then from the Application‑Specific Passwords
section, click Generate New Password.
Zoho Mail Account Security
55
page, log