Table of Contents
Advertisement
Use printer menus
Menu item
Lock PS Startup Mode
Off
On*
Image Smoothing
Off*
On
Font Priority
Resident*
Flash/Disk
Wait Timeout
Off
On* (40 seconds)
Note: An asterisk (*) next to a value indicates the factory default setting.
PCL
Menu item
Font Source
Resident*
Disk
Download
Flash
All
Font Name
[List of available fonts] (Courier*)
Symbol Set
[List of available symbol set] (10U
PC‑8*)
Pitch
0.08–100.00 (10.00*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Disable the SysStart file.
Note: Enabling the SysStart file exposes your printer or network to a
security risk.
Enhance the contrast and sharpness of low‑resolution images.
Note: This setting has no effect on images with a resolution of 300 dpi or
higher.
Establish the font search order.
Notes:
•
Resident sets the printer to search its memory for the requested font
before searching the hard disk or intelligent storage drive (ISD).
•
Flash/Disk sets the printer to search the hard disk or ISD for the
requested font before searching the printer memory.
•
This menu item appears only when a hard disk or an ISD is installed.
Enable the printer to wait for more data before canceling a print job.
Description
Select the source which contains the default font selection.
Notes:
•
Disk and Flash appear only when a non‑defective, non‑protected
hard disk or flash memory that contains fonts is installed.
•
Download appears only if downloaded fonts exist in the printer
memory.
Select a font from the specified font source.
Specify the symbol set for each font name.
Note: A symbol set is a set of alphabetic and numeric characters,
punctuation, and special symbols. Symbol sets support the different
languages or specific programs such as math symbols for scientific text.
Specify the pitch for fixed or monospaced fonts.
Note: Pitch refers to the number of fixed‑space characters in a horizontal
inch of type.
197
Advertisement
Table of Contents
