Table of Contents
Advertisement
HOW TO SET UP THE CONSOLE
Before using the treadmill for the first time, set up the
console.
1. Connect to your wireless network.
In order to access the internet, download iFit work-
outs, and use several other features of the console,
you must be connected to a wireless network.
Follow the prompts on the screen to connect the
console to your wireless network.
2. Customize settings.
Fill in the form on the screen to set the console to
display the desired unit of measurement and your
time zone. Note: If you need to change these set-
tings later, see HOW TO USE THE EQUIPMENT
SETTINGS SECTION on page 26.
3. Log into or create an iFit account.
Provide your email address, and follow the prompts
on the screen to sign up for or log into your iFit
account.
4. Tour the console.
The first time you turn on the treadmill, dialogue
boxes on the screen will guide you through the
features of the console. Note: To access the tour
again at any time, touch the profile button in the
lower-right corner, then touch the Settings button,
and then scroll to the How It Works section.
5. Check for firmware updates.
First, touch the profile button in the lower-right cor-
ner to select the settings main menu. Next, select
the maintenance section. Then, touch the Update
button to check for firmware updates using your
wireless network. See step 3 on page 25 for more
information.
6. Calibrate the incline system.
First, touch the profile button. Next, select the set-
tings main menu. Then, select the maintenance
section, touch the Calibrate Incline button, and then
touch the Begin button to calibrate the incline sys-
tem. See step 4 on page 26 for more information.
The console is now ready for you to begin working
out. The following pages explain the various work-
outs and other features that the console offers.
To use the manual mode, see this page. To use a
map workout, see page 23. To use a draw your
own map workout, see page 24. To use a dis-
tance or time workout, see page 24.
To use the workout settings section, see page 25.
To use the equipment settings section, see page 26.
To use the maintenance section, see page 26. To
use the wireless network mode, see page 27. To
use the sound system, see page 27. To connect an
HDMI cable, see page 28. To use the tablet holder,
see page 28. To adjust the cushions, see page 28.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 31).
HOW TO USE THE MANUAL MODE
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
20. Note: It may take some time for the con-
sole to be ready for use.
2. Select the main menu.
When you turn on the power, the main menu will
appear after the console boots up. If you are in a
workout or the settings menu, touch the back arrow
or the x on the screen to return to the main menu.
21
Advertisement
Table of Contents
