Table of Contents
Advertisement
10. Identify the Right and Left Trays (27, 36).
Attach the Trays (27, 36) to the Console Base
(64) with eight #8 x 1/2" Screws (1); do not
overtighten the Screws.
Hold the Console Frame (18) near the Console
Base (64) and connect the Console Ground
Wires (58) to the ground wires (J) in the Console
Base.
Then, reattach the Console Frame (18) with the
six #8 x 3/4" Screws (2) and the two Console
Clamps (92) that you removed in step 9; do not
overtighten the Screws. Make sure no ground
wires are pinched.
11. IMPORTANT: To avoid damaging the Pulse
Crossbar (93), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9).
Orient the Pulse Crossbar (93) as shown. Attach
the Pulse Crossbar to the Handrails (86) with two
#10 x 3/4" Screws (9) and two #10 Star Washers
(5); start both Screws, and then tighten them.
Make sure not to pinch the Upright Wire
(81). Firmly tighten the four 5/16" x 2 1/2"
Screws (28).
10
2
18
27
1
11
9
5
28
86
12
2
2
92
1
58
2
1
64
J
93
28
92
1
36
9
5
86
81
Advertisement
Table of Contents
