Start-Up Procedures - Electrolux IPro R452a Operator's Manual

9. START-UP PROCEDURES

!IMPORTANT!
BEFORE STARTING THE MACHINE, CARRY OUT
THE CLEANING AND SANITISING PROCEDURES
DESCRIBED IN CHAPTER 1.
- Dilute and mix the product in a separate
container according to the manufacturer's
instructions (see fig.16); never pour dry
powder, crystals, or concentrate into a dry bowl.
Make sure that the mixture has a sugar content
near the 12-14%; a lower concentration could
seriously damage the mixing parts, as well as
the gearmotors.
NEVER USE ONLY WATER.
- Remove the luminous cover after unblocking it
by turning its special key clockwise (see fig.17).
- Remove the secondary transparent cover
(fig.18).
- Pour the mix obtained into the bowl respecting
the maximum limit on the bowl (see fig.19).
- Restore the secondary transparent cover and
then the luminous one making sure to have it
pushing against the security system
- Secure it by rotating its key counter clockwise.
Note -----------------------------------------------
IPRO is equipped with a very efficient safety
mechanism designed to protect the operator; it
is activated when cover is lifted. This device
automatically and immediately stops all moving
If the main cover is not correctly
positioned, the unit will not work.
------------------------------------------------------
- Insert the plug into the electrical power outlet.
- Activate the main switch.
Data di emissione: July, 2023
Caution
parts.
Revisione: 01
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Pag. : 15/52