Positioning - Electrolux IPro R452a Operator's Manual

Slush machine
Table of Contents

Advertisement

6. POSITIONING

FOR SERVICEMAN ONLY
The installation and subsequent servicing
operations must be carried out by skilled
members who have been trained to use the
device and in compliance with the
regulations in force.
a) Remove the packing (fig.13), preserve it in
order to reuse for winter storage and make
sure the machine is in perfect condition.
!CAUTION!
All the parts of the packaging must be kept
beyond the range of children, as they
might represent a potential safety/health
b) Rest the machine on a sturdy, flat surface
making sure it is well ventilated by leaving a
gap of 20cm/8" all around it and do not install it
near heat sources (fig.14); we recommend
you
to
maintain
between 24 and 38°C (between 75 and
100°F).
For
the
220-230V/60Hz
temperature
can
43°C/109°F.
c) Check that the power mains voltage meets
the
specifications
identification plate and that the output available
meets the device's power requirements.
Fit the plug into an earthed socket, removing all
multiple adaptors.
FOR FURTHER PRECAUTIONS, READ THE
SECTION "CONNECTION TO THE
ELECTRICITY MAINS" CAREFULLY.
d) The installation must be carried out in
accordance with the manufacturer's instructions.
Failure to comply with the positioning and
installation
instructions
machine's operation.
Important
You are legally required to provide a suitable
grounding system for the equipment.
Before carrying out any cleaning and/or special
maintenance on the device, make sure it is
disconnected from the mains by unplugging it.
In the event of a breakdown or malfunctioning,
switch off the device and remove the plug.
Data di emissione: July, 2023
risk.
a
room
temperature
version
be
extended
on
the
equipment
may
impair
this
up
to
the
Revisione: 01
Fig. 13
Fig. 14
Pag. : 12/52

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ipro r449Ipro r290

Table of Contents