16
Installation > Prepare coffee modules
Prepare coffee modules
Mount cup holder supports
1. Insert the cup holder support (a) on one side of the coffee module.
2. Slide the cup holder support upwards and screw it on (TX20).
3. Attach the blind cup holder (b) the same way on the other side of the coffee
module.
4. Assemble the cup holder support and the blind cup holder on the other coffee
module inversely.
Please note that both cup holder supports and blind cup holders are mirror
inverted in relation to each other and cannot be assembled arbitrarily.
Momento Service manual
a
b
Fig. 13
Version 0.1 EN