Nespresso Momento 100 Service Manual page 60

Danger of
damage! Do not
pull out the water
tank slot too far
while the water level
detection wires are still
connected.
60
Repair > Chassis repairs > Remove water tank slot
B55/A52
4. Press in the latches (see lower detail) on both sides of the water tank slot
(B55/A52) and pull it out a bit.
5. Unplug both water level detection wires (see upper detail, red circles) from the
back of the water tank slot (B55/A52) as soon as you can reach them.
Momento 100 has only has only one water level detection wire.
Momento Service manual
Fig. 32
Version 0.1 EN