Table of Contents
Advertisement
Assemble coffee modules
1. Hold the coffee module on the orange handle. Reach in the capsule ejection
opening with the other hand for support.
2. Insert each coffee module into the related slot of the main housing and place it
on the guide rails at the bottom.
3. Carefully slide each coffee module into the main housing until stop.
4. To ensure correct positioning, push each coffee module into the main housing
and pull it down at the capsule ejection opening.
5. Fasten the Tri-Wing screws to secure both coffee modules.
6. Mount the cup holders.
For correct assembly of the coffee modules, make sure that the supports
for the cup holders are placed next to the water tank door.
For Momento 200, perform an insulation resistance test to finish the
installation of the coffee module(s)! → p. 112
Version 0.1 EN
Installation > Prepare coffee modules
Momento Service manual
Fig. 14
Fig. 15
17
Hide quick links:
Advertisement
Table of Contents
