Nespresso Momento 100 Service Manual page 104

The illustration
shown is with the
thermoblock, valves
and pressure hoses
removed – for better
visibility.
104
Repair > Coffee Module repairs > Replace complete brewing unit (MHBU)
7. Loosen 1 screw (TX20) on the brewing unit (C21).
8. Slide the brewing unit forward and lift it up at the same time to remove it from
chassis BU (C01).
Assembly tips
• Only use the black coloured connector clip for the hose adapter (C80) connecting
directly to the thermoblock (C24).
• Always replace the O-ring (C81) seated between the thermoblock (C24) and hose
adapter (C80).
• Always replace the O-rings (C81) seated between valves and hose adapters (C80).
• Always replace the O-ring (C12) seated between pump connector (C10) and pres-
sure hose.
Momento Service manual
C21
C01
Version 0.1 EN
Fig. 88