Nespresso Momento 100 Service Manual page 98

98
Repair > Coffee Module repairs > Replace brewing unit (maintenance kit)
3. Push down the base handle (z) as far as it will go to move the front assembly (d)
into "open"-position.
4. Re-insert the worm gear (y) and worm gear support (x).
a
C23
5. Unclip the steam hood (C23) and remove it from the brewing unit (C21).
6. Detach the angular circlip (a) from the front axle (b) and remove the front axle (b).
Momento Service manual
z
C21
b
d
Fig. 78
Fig. 79
Version 0.1 EN