Adjustment Of The Push Buttons Remaining And Momentary Functions; Radio Communication Power - Akerstroms Remotus Jupiter Era 4B Installation Manual

Transmitter configuration mode
8.1.5

Adjustment of the Push Buttons Remaining and Momentary Functions

The buttons either have momentary functions, which give a signal for only as long as you keep pressing,
or remaining functions.
Note that this function needs support from the receiver PLC. Before changing these parameters,
check the program options. Only qualified personnel may make these changes.
1. Enter the configuration menu.
2. Then select "Button function" with bottom right button (browse with top buttons).
3. Press down the buttons for which you want to have a remaining/momentary function. Lighted but-
ton LED indicates remaining function. Note: The three pair of buttons 1-2, 3-4 and 5-6 must have
the same settings within the pair. For 10BD must also buttons 7-8 have the same settings within
the pair. Otherwise, the momentary function is disabled on the button that is not remaining.
4. Restart the transmitter.
8.1.6

Radio communication power

To change the settings, do the following:
1. Enter the configuration menu.
2. Then select "Radio comm power"
3. Then browse to the desired setting with top buttons:
•
•
Already selected setting is indicated by top left button LED.
4. Select setting by press down bottom right button.
5. Automatic return to the main menu or restart the transmitter.
Installation manual Remotus Jupiter FSK16
"100 % power"
"25 % power"
Version: A0
; with bottom right button (browse with top buttons).
Document-ID: 959125-000 EN
20 (44)
Browse Browse
Choose
Back
/OK
Browse Browse
Choose
Back
/OK
Author: SH