Description Of The Transmitter; Indications On The Transmitter; Operation; Figure 5. The Sesam 800 M6 Transmitter Indicator And Buttons - Akerstroms SESAM 800 Operating Manual

Description of the Transmitter

9 Description of the Transmitter
Figure 5.
9.1

Indications on the Transmitter

Normal operation
Quick flashing RED LED =
Continuous GREEN LED =
Battery warning
Continuous RED after activating a command = Low battery.
3 long RED LED flashes = Battery depleted, transmitter can not send commands.
10

Operation

The object is controlled via the
the transmitter in order to controlling the object. Some of the buttons may be set
as remaining functions.
For relationship between outputs and buttons see Table 2.
Sesam 800 Configurable (original instructions)
Version: C1
Indicator LED
Control buttons
1 2 3
4 5 6
The Sesam 800 M6 transmitter indicator and buttons
Sending message but no feedback
available from the receiver.
Output activated in the receiver
(feedback information from receiver).
buttons on the transmitter. Press the buttons on
Document-ID: 947422-000 EN
Author: SH
11 (16)