VTech SIP Contemporary Series User Manual page 14

Handset registration
Place the cordless handset on the telephone
base cradle. Handset registration happens
automatically the first time a cordless handset is
placed on the telephone base.
When the registration process completes, the
MESSAGE WAITING LED flashes once and you
hear 3 rising beeps as confirmation.
Each telephone base accommodates up to
five cordless handsets. When you already have
five registered handsets, you can replace one
of them by a new handset if any one of the
five registered handsets is disconnected from
the base. For example, it is out of range, or its
battery is removed or depleted. The previous
registered handset is then deregistered from the
telephone base.
Register a handset to another
telephone base
Any contemporary cordless 1-line handset can
register to any contemporary cordless 1-line
telephone base.
When a registered cordless handset is idle, place it
on another telephone base. This cordless handset
automatically registers to the new telephone base.
Handset battery charging
The battery must be fully charged before using the
cordless handset for the first time. The CHARGE LED
turns on when the cordless handset is charging on
the telephone base. The battery is fully charged
after 16 hours of continuous charging. For best
performance, keep the cordless handset in the
telephone base or charging stand when not in
use.
EN - 14