Related Manuals for Speco Intensifier O2iD8
Summary of Contents for Speco Intensifier O2iD8
- Page 1 Intensifier® IP Dome Camera QUICK INSTALLATION GUIDE O2iD8 Please read this guide carefully before installation and operation of the product.
- Page 2 Thank you for purchasing this product. This guide is designed to be a reference tool for the product. Please read it carefully before operating the product and retain it for future reference. Should you require any technical assistance, please contact Speco Technologies Technical Support. CAUTION...
-
Page 3: Limitation Of Liability
PRECAUTIONS Please read the manual carefully before the installation in order to set up the camera correctly and to obtain the best picture quality. Installation and services should only be carried out by an authorized personnel according to local safety regulations. -
Page 4: Product Overview
1. PRODUCT OVERVIEW Key Features 2.0 megapixel progressive scan CMOS image sensor for excellent image quality Low light, Ultra high sensitivity camera IP66 compliant Vandal-resistant 3-axis mechanism Built-in temperature / humidity sensor Heater operation according to humidity ... - Page 5 Integration Alarm trigger Motion detection Firmware Upgrade Remote Upgrade via Network Memory Slot Micro SD slot Power Source DC 12V, POE (Power Over Ethernet) : 802.3af Power Consumption Physical Net Weight 1.3lbs LEDs Power, Network Connection Dimensions 4.8” (Ø ) x 3.8” (H) Operating Temperature 14F ~ 122F Environment...
-
Page 6: Name And Function Of Each Part
2. NAME AND FUNCTION OF EACH PART 2.1 Package Contents APPEARANCE DESCRIPTION IP Camera x 1 Installation Guide x 1 Drilling Template x 1 Tapping screw (Ø 4 x 30) x 3 Plastic anchor x 3 Torx Wrench x 1 CD x 1 Junction Box Top Rubber x 1... -
Page 7: Name And Function
2.2 Name and Function ITEM DESCRIPTION DC12V Caution : If camera is powered by PoE, do not Power Connector plug in DC Jack with active DC power into DC power connector. Network and POE (Power over Ethernet) and LAN cable POE Connector Lens 3.6mm fixed lens... -
Page 8: Installation
3. INSTALLATION 3.1 Adjust Pan, Tilt and Rotation and the Viewing Angle - Pan, Tilt, Rotate (3-Axis mechanism) Panning axis can be adjusted 360° The front side of the Tilting axis can be adjusted 0° ~ 90° camera Tilt 90°... - Page 9 ① Paste a Drilling Template on the ceiling. (or wall) ② Drill screw points which will be done for installation. Fix the plastic anchors in the holes. (in case of masonry ceiling or wall) ③ Mount the camera set by using Tapping Screws with Ø 4 provided. ④...
- Page 10 3.3 INSTALLATION EXAMPLE 3.3.1 Installation Example LAN Switch Router Internet Remote Access Local Access E-Mail / FTP 3.3.2 Connecting to the Network Open up IP Scanner. IP Scanner can search for the device on the local network. Please note that only devices that are on the same subnet can be discovered. The device is set to DHCP mode by default.
- Page 11 3.3.3 Accessing the Camera’s Web Setup Page 1) Open the browser and enter the camera’s IP address in the address bar or double click the device in IP Scanner. Enter the IP address here 2) Enter the user name and password when prompted. 3) Default user name is admin and password is 1234.
-
Page 12: Dimensions (Mm)
4. DIMENSIONS (mm)