SHOWTEC Vintage Blaze 33 Value Line V2 Manual page 10

Vintage Blaze '33 Value Line
Procedure:
01) Disconnect the Vintage from power before installing the lamp.
02) Remove the 4 screws at the top of the fixture (Fig.03).
03) Carefully disconnect the LED strip from the 2 connectors at the side of the lamp grill (Fig.04).
04) Remove the lamp grill (Fig.05).
05) Disconnect the lamp holder at the bottom of the fixture (Fig.06).
06) Remove the lamp from the box and hold it by the base. Read the lamp instructions. Do not touch the
lamp bulb glass. Oil on hands shortens the lamp's lifespan. If you touch the bulb glass, wipe it off with
a clean, lint free towel and rubbing alcohol. Insert the lamp (Fig.07).
07) Carefully connect the LED strip to the 2 connectors (Fig.08).
08) Replace the lamp grill (Fig.09) and fasten the 4 screws at the top of the fixture (Fig.10).
09) The Vintage is now ready to use.
Ordercode: 43324
9
Fig. 03
Fig. 04