Page 2
For more information: iwant@showtec.info You can get some of the best quality, best priced products on the market from Showtec. So next time, turn to Showtec for more great lighting equipment. Always get the best -- with Showtec ! Thank you!
Showtec Showtec LED Versatrack Product Guide ™ Warning..…...................……………………………………………………….. Safety-instructions………………………………………………………………………………………………………… Operating Determinations…….………………………………………………………………………………………… Rigging…………………………….………………………………………………………………………………………… Description..…................……….…………………………………………….. Features and Overview …………..……………………...….……………….………….……….……….……………. Backside……………………………….…………………...…...….……………….…………………...………………… Installation................…...………………………………………….………..…. Set Up and Operation..............……..……………………………………………… Fixing……...........……..……………………………….………………………………………….…. Batten Bracket (accessory for Versatrack 42211)………………………………..…….…….……………….. Blinder Frame (accessory for Versatrack 42212)………………………………….…………..….…………… Hinge Kit (accessory for Versatrack 42213)…………………….……………….…….…….………………….
WARNING CAUTION! Keep this device away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
(preferably in the original packing material), and return it to your Showtec dealer for service. The user is responsible for correct positioning and operating of the LED Versatrack. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device.
Page 6
Truss Mount Fixture should be hung on truss structure using a mounting clamp. Always secure the fixture with a secondary safety attachment. Wall Mount Before attaching the device, make sure the installation surface can hold a minimum point load of 10 times the device’s weight.
Description of the device Features LED Versatrack is a LED system from Showtec. • Standard 5, 8, 11, 20 channels and Full Function 8, 11, 14, 23 channels DMX control. • Stand – alone operation: • Master/Slave. • Manual color mixing •...
Do not attempt to operate a 120V specification product on 230V power, or vice versa. Note : Link all cables before connecting electric power. You have 3 possibilities to set up your LED Versatrack: Separate Connected on top of eachother...
Blinder Frame (accessory for Versatrack 42212) Refer to diagram below to install blinder frame. First install the side plate with light fixture then carefully install the hanging bracket. Hinge Kit (accessory for Versatrack 42213) The hinge kit has 3 standard angles (60°, 72°, and 90°). It can also be adjusted manually from minimum 55° up to maximum 90°.
To make multilateral shaping first attach hinge kit to the fixture follow the diagram below. Link all the fixtures together using the hinge kit until it is finished. The hinge kit can also use as internal angle, simply remove the locking screw and install on the other side. U-Shape Acrylic Cover (accessory for Versatrack 42214) To make a light tube simply attached the U shape acrylic to the front of fixture.
Menu Functions Using the Control Panel: [MODE] Browse through main menu or esc from current view. [F/S] Browse through sub-menu. [UP] [DOWN] Make adjustment or activate function.
FUNCTIONS: There are 3 options to operate the LED Powerbrick: Stand-alone Master / Slave DMX Mode Stand – Alone Operation Manual Color Mixing 1) Press the MODE button to scroll though the menu until the display shows 2) Press the F/S button to scroll through submenu and use the UP/ DOWN buttons to change the settings . 3) Press the F/S button again to store your setting.
In order to receive a DMX signal, the built-in controller must be attached to a DMX controller by a 3-pin DMX cable and the DMX controller must be turned on. When you press the DMX cable in the LED Versatrack the display switches from Addressing the Fixture 1) Press the MODE button to scroll though the menu until the display shows 2) Press the F/S button to scroll through submenu and use the UP/ DOWN buttons to change the settings .
2) Use the UP/ DOWN buttons to choose one of the control modes. The LED Versatrack system can operate as a 23-, 14-, 11- or 8-channel DMX fixture when in Func ON Mode. The LED Versatrack system can operate as a 20-, 11-, 8- or 5-channel DMX fixture when in Func OFF Mode.
Func OFF Select the desired Mode by pressing the MODE button, you can choose: 20 Channels 11 Channels 8 Channels 5 Channels (4 sections) (3 sections) (2 sections) (1 section) 20 CH 11 CH 8 CH 5 CH Red (A) Red (A+B) Red (A+B+C) Red (ABCDEF)
3. If all of the above appears to be O.K., plug the unit in again. 4. If you are unable to determine the cause of the problem, do not open the LED Versatrack, as this may damage the unit and the warranty will become void.