Table of Contents
Advertisement
Quick Links
Clamp-on Shelving Unit for Desk
Instruction Manual
SKU: DESK-SHELF3CL
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-shelf3cl
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vivo DESK-SHELF3CL
Summary of Contents for Vivo DESK-SHELF3CL
- Page 1 Clamp-on Shelving Unit for Desk Instruction Manual SKU: DESK-SHELF3CL Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-shelf3cl GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
- Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
- Page 3 ASSEMBLY STEPS STEP 1 Install Cam Lock Screws (S-A) into one Exterior Shelf (A) using a Phillips screwdriver. Ensure the screws are fully threaded into the shelf and seated upright. Slide Side Walls (B) onto the installed Cam Lock Screws (S-A). Seated Upright Ensure overhang of Exterior Shelf (A) is on the same side as...
- Page 4 STEP 2 Install Cam Lock Screws (S-A) into remaining Exterior Shelf (A) using a Phillips screwdriver. Ensure the screws are fully threaded into the shelf and seated upright. Turn Exterior Shelf with Cam Lock Screws (S-A) upside down and place on top of Side Walls (B). Ensure overhang of Exterior Shelf (A) is on the same side as pilot holes of Side Walls (B).
- Page 5 STEP 3 Attach Back Wall (C) to the shelf assembly using ST3.9x25mm Screws (S-C) and a Phillips screwdriver. Use Stickers (F) to conceal the cam lock holes. STEP 4 Remove the protective film from the silicone pad on inside of Clamp (E). Install Clamps (E) to Back Wall (C) using M5x18mm Screws (S-E), M5 Washers (S-F), and a Phillips screwdriver.
- Page 6 STEP 5 Clamp assembly to desired location on desk leg. If using a height-adjustable desk, lower the frame to its lowest position before clamping onto the leg to ensure the shelf will not collide with obstructions throughout the entire range of motion on the desk. STEP 6 Determine desired shelf heights before continuing.
- Page 7 STEP 7 Place Interior Shelves (D) onto installed Pins (S-D).
- Page 8 : 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the DESK-SHELF3CL and is the answer not in the manual?
Questions and answers