Advertisement
Quick Links
Black Desk Riser with Single Monitor Mount
Instruction Manual
SKU: DESK-V000K-M1
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-v000k-m1
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Related Manuals for Vivo DESK-V000K-M1
Summary of Contents for Vivo DESK-V000K-M1
- Page 1 Black Desk Riser with Single Monitor Mount Instruction Manual SKU: DESK-V000K-M1 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v000k-m1 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Tools Needed
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury. 17.6lbs 33lbs 4.4lbs Phillips (8 kg) (15kg) (2kg) Screwdriver SCREEN DESKTOP KEYBOARD TRAY ASSEMBLY STEPS STEP 1 Separate the sleeve nut w/ bolt (Q) into Q1 and Q2. STEP 2 Press Q1 into holes on top of keyboard tray (N). - Page 4 STEP 4 Raise the desk by squeezing the handles underneath the desk. STEP 5 Place keyboard tray (N) on metal brackets on desk (M). Secure keyboard tray to brackets using screws (Q2) and tighten with a Phillips screwdriver. STEP 6 Apply cable clips (O) to underside of desk.
- Page 5 STEP 7 Assemble column (A) to stand base (D) using M6x16 bolts (G) and tighten with the 4mm Allen wrench (K). Apply rubber pads (H) to underside of base. STEP 8 Remove plug from desk surface (M). Position the assembled column with base over the grommet hole, and install to desktop using the M8x55 bolt (F) with support plate (F).
- Page 6 STEP 10 Install the VESA plate (B) to monitor using bolts (M-A or M-B) and washers (M-C). STEP 11 Slide the VESA plate (B) with monitor onto the bracket (C). Secure using the thumbscrew (J). STEP 12 If needed, adjust tilt joint support using the 6mm Allen wrench (L). Use the stand cable clip (I) to organize cables.
- Page 7 STEP 13 Store Allen wrenches (K, L) in the stand cable clip (I) when not in use. STEP 14 Adjust desk height by squeezing the handle and pulling up or pushing down. Adjust monitor position and rotation as desired.
- Page 8 - 92% within < 3hr www.vivo-us.com AVG. RESOLUTION TIME : < 15 M (within office hrs) Chat live with an agent! 309-278-5303 AVG. RESOLUTION TIME : 5M 4S (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the DESK-V000K-M1 and is the answer not in the manual?
Questions and answers