Table of Contents
Advertisement
Configuration with TIA Portal
TIA Portal - Work environment > General
10
Configuration with TIA Portal
10.1
TIA Portal - Work environment
10.1.1
General
General
Starting the TIA Portal
Exiting the TIA Portal
140
In this chapter the project engineering of the Yaskawa CPU in the Siemens TIA Portal is
shown. Here only the basic usage of the Siemens TIA Portal together with a Yaskawa
CPU is shown. Please note that software changes can not always be considered and it
may thus be deviations to the description. TIA means Totally integrated Automation from
Siemens. Here your Yaskawa PLCs may be configured and linked. For diagnostics online
tools are available.
Information about the Siemens TIA Portal can be found in the online help
respectively in the according online documentation.
To start the Siemens TIA Portal with Windows select 'Start è Programs
è Siemens Automation è TIA ...'
Then the TIA Portal opens with the last settings used.
With the menu 'Project è Exit' in the 'Project view' you may exit the TIA Portal. Here
there is the possibility to save changes of your project before.
System 300S
HB140 | CPU | 315-4PN23 | en | 18-02
+
Advertisement
Table of Contents
