Fast Introduction - YASKAWA SPEED7 300S+ CPU 315PN Manual

+
System 300S

7.2 Fast introduction

Overview
Steps of configuration
HB140 | CPU | 315-4PN23 | en | 18-02
The PROFIBUS DP master is to be configured in the hardware configurator. Here the
configuration happens by means of the sub module X1 (DP) of the Siemens CPU.
For the configuration of the PROFIBUS DP master please follow the following approach:
n Hardware configuration - CPU
n Deployment as DP master or Deployment as DP slave
n Transfer of the complete project to CPU
To be compatible to the Siemens SIMATIC Manager, the CPU
315-4PN23 from VIPA is to be configured as
CPU 315-2 PN/DP (6ES7 315-2EH14-0AB0 V3.2)!
The integrated PROFIBUS DP master (X3) is to be configured and con-
nected via the sub module X1 (DP). The Ethernet PG/OP channel of the
315-4PN23 is always to be configured as 1. module after the really
plugged modules at the standard bus as CP 343-1 (343-1EX11) from Sie-
mens.
Deployment PROFIBUS communication
Ä Chap. 5.10 'Project transfer' page 52
Fast introduction
91