Table of Contents
Advertisement
Basics
CPU 315-4PN23
2.3 CPU 315-4PN23
Overview
Access
12
The CPU 315-4PN23 bases upon the SPEED7 technology. This supports the CPU at pro-
gramming and communication by means of co-processors that causes a power improve-
ment for highest needs.
n
The CPU is programmed in STEP
SIMATIC Manager or TIA Portal from Siemens. Here the instruction set of the S7-400
from Siemens is used.
n
Yaskawa components of the System 300S and Siemens components may be used at
the bus as a mixed configuration.
n
The user application is stored in the battery buffered RAM or on an additionally plug-
gable storage module.
n
The CPU is configured as CPU 315-2 PN/DP (6ES7 315-2EH14-0AB0 V3.2) from
Siemens.
Please always use the CPU 315-2 PN/DP (6ES7 315-2EH14-0AB0 V3.2)
from Siemens of the hardware catalog to configure this Yaskawa CPU.
For the project engineering, a thorough knowledge of the Siemens
SIMATIC Manager and the hardware configurator from Siemens is
required!
Ò
7 from Siemens. For this you may use the
HB140 | CPU | 315-4PN23 | en | 18-02
+
System 300S
Advertisement
Table of Contents
