Ncm Diagnostic - Help For Error Diagnostic - YASKAWA SPEED7 300S+ CPU 315PN Manual

+
System 300S
Handling blocks
UDTs
FB Label
UDT 65 TCON_PAR
UDT 66 TCON_ADR
FBs
FB Label
FB 63 TSEND
FB 64 TRCV
FB 65 TCON
FB 66 TDISCON
FB 67 TUSEND
FB 68 TURCV
8.11

NCM diagnostic - Help for error diagnostic

Siemens NCM S7 diag-
nostic
HB140 | CPU | 315-4PN23 | en | 18-02
Those in the following listed UTDs and FBs serve for "open communication" with other
Ethernet capable communication partners via your user program. These blocks are part
of the Siemens SIMATIC Manager. You will find these in the "Standard Library" at "Com-
munication Blocks". Please consider when using the blocks for open communication that
the partner station does not have to be configured with these blocks. This can be config-
ured with AG_SEND / AG_RECEIVE or IP_CONFIG.
Connection-oriented protocols: TCP
native as per RFC 793, ISO on TCP as
per RFC 1006
Data structure for assigning connection
parameters
Connection-oriented protocols: TCP
native as per RFC 793, ISO on TCP as
per RFC 1006
Sending data
Receiving data
Establishing a connection
Terminating a connection
The module supports the Siemens NCM diagnostic tool. The NCM diagnostic tool is part
of the Siemens SIMATIC Manager. This tool delivers information about the operating
state of the communication functions of the online CPs dynamically.
The following diagnostic functions are available:
n Check operating state at Ethernet
n Read the diagnostic buffer of the PROFINET IO controller
n Diagnostic of Siemens S7 connections
Deployment Ethernet communication - productive
NCM diagnostic - Help for error diagnostic
Connectionless protocol: UDP as per
RFC 768
Data structure for assigning parameters
for the local communications access
point
Data structure for assigning addressing
parameters for the remote partner
Connectionless protocol: UDP as per
RFC 768
Configuring the local communications
access point
Closing the local communications access
point
Sending data
Receiving data
117