Configuration with TIA Portal
TIA Portal - Setting VIPA specific CPU parameters
Take IP address parame-
ters in project
10.6
TIA Portal - Setting VIPA specific CPU parameters
Requirements
148
1.
Open your project.
2.
If not already done, configure in the 'Device configuration' a Siemens CPU 315-2
PN/DP (6ES7 315-2EH14-0AB0 V3.2).
3.
Open the "Property" dialog by clicking on the 'PROFINET interface' and enter for
PROFINET interface "Properties" at 'Ethernet address' the IP address data, which
you have assigned before.
4.
Transfer your project.
Device overview
Module
...
PLC ...
MPI/DP interface
PROFINET inter-
face
...
Since the VIPA specific CPU parameters may be set, the installation of the
SPEEDBUS.GSD from VIPA in the hardware catalog is necessary. The CPU may be con-
figured in a PROFIBUS master system and the appropriate parameters may be set after
installation.
Slot
...
2
2 X1
2 X2
...
HB140 | CPU | 315-4PN23 | en | 18-02
System 300S
Type
CPU 315-2 PN/DP
MPI/DP interface
PROFINET interface
...
+
...