Parameters Cpu - YASKAWA SPEED7 300S+ CPU 315PN Manual

Deployment CPU 315-4PN23
Setting standard CPU parameters > Parameters CPU

5.8.2 Parameters CPU

Supported parameters
General
44
The CPU does not evaluate each parameter, which may be set at the hardware configu-
ration. The following parameters are supported by the CPU at this time:
n Short description
– Short description of the Siemens CPU 315-2 PN/DP (6ES7 315-2EH14-0AB0
V3.2).
n Order No. / Firmware
– Order number and firmware are identical to the details in the "hardware catalog"
window.
n Name
– The Name field provides the short description of the CPU.
– If you change the name the new name appears in the Siemens SIMATIC Man-
ager.
n Plant designation
– Here is the possibility to specify a plant designation for the CPU.
– This plant designation identifies parts of the plant according to their function.
– Its structure is hierarchic according to IEC 1346-1.
Location designation
n
– The location designation is part of the resource designation.
– Here the exact location of your module within a plant may be specified.
n Comment
– In this field information about the module may be entered.
System 300S
HB140 | CPU | 315-4PN23 | en | 18-02
+