Syscom Video HCZP572W Manual page 16

5.2.7 SPECIAL
D/N MODE
D/N DELAY
HI-RES
2DNR
3DNR
WHITE DET
LEVEL
5.2.8 EFFECT
SHARPNESS
NEGATIVE
D-FLIP
FREEZE
DIS
5.2.9 CAM SET
Select D/N, Color, BW.
Adjust the working time of the filter when D/N operated.
(5,10,20 sec)
Select high resolution mode. (LOW/MID/HIGH)
Select 2D noise reduction level. (OFF/01~07)
Select 3D noise reduction level. (AUTO/01~28)
AUTO : If the motion is detected, DNR level
automatically so "ghost" is decreased, on the other hand, noise
will be increased. On the opposit, if there is no motion, DNR level
is raised and noise will be decreased.
Press the Menu key to execute the White Pixel Detection function
and then the Iris will be closed automatically. When detection is
completed, the operation automatically returns to the normal state.
Adjust the threshold level from 1 to 15. (Default is 4)
Adjust sharpness of outline. (0~15)
Select the negative or positive mode.
Select rotate or flip mode. (OFF/V FLIP/H FLIP/ROTATE)
Select the real or still mode.
Select On or Off the DIS mode. (Digital Image Stabilizer)
16
becomes lower