Overview; Specification - Toshiba TOSVERT VF-AS3 Manual

2. Overview

®
The EtherCAT
®
EtherCAT network. The drive is controlled by 2 drive profiles (CiA402 V3 or TOSHIBA).
Also, VF-MB1/S15/AS3 supports BECKHOFF software TwinCAT
®
EtherCAT and TwinCAT
Automation GmbH, Germany.

2.1. Specification

Module specifications
Item
Type-form
Applicable inverter
Connector
Supported network
Indicator
Protection degree
Environments
Network specifications
Baud rate
Cyclic communication
Acyclic communication
EtherCAT
Drive profile
Other support service
Command reception time
*1: Command reception time is the time until the inverter is operated by RUN command on the cyclic
communication.
interface (IPE003Z) allows the VF-MB1/S15/AS3 drive to be connected into the
®
are registered trademark and patented technology, licensed by Beckhoff
Item
®
Specification
IPE003Z
VF-MB1
VF-S15 with SBP009Z
VF-AS3 (CPU1 version 106 or more)
RJ45  2
®
EtherCAT
Supports the CoE only. Supports CANopen CiA
drive profile
4 LEDs indicating the communication status and error
status and 2 link status
IP20
Correspond to inverter.
Note) The maximum ambient temperature for VF-AS3 is
50 degrees when the option is installed.
100Mbps
PDO function *2
SDO function *3
CiA402 drive profile
TOSHIBA drive profile
EtherCAT state machine
Emergency (EMCY)
About 5ms *1
- 6 -
V2.x with CODESYSY V2.
®
Specification
E6581818⑭
402 V3