Installation (Door Panel Removable); Installation (Pedestal Attach To Top) - JSI Vision-Desk ADJUSTABLE HEIGHT Install Instructions

Installation (Door Panel Removable)

Remove outer panel by pulling out. Remove inner panel by sliding panel upward.
OUTSIDE PANEL PULLS/SNAPS OFF

Installation (Pedestal Attach to Top)

Place Top face down on a scratch resistance surface. Place Pedestal on one side of top . Secure Pedestal to Top using #8 X 3/4 Pan Head Phillips
screws to the 90° Bracket and Corner Bracket. (2 places) Secure Leg Plate Bracket and U-Bracket (2) to Top using #10 X 7/8 Pan Head Phillips.
Slide (2) Top Support Rails into Leg assembly.
(2) TOP SUPPORT RAILS
8/26/2022
MINI RAFIX FASTENER
(2) PER PANEL
(PULL TO RELEASE)
INSIDE PANEL SLIDES UP TO REMOVE
(2) PER U-BRACKET (2) U-BRACKETS
DESK TOP
KEKU FASTENER
(2) PER PANEL
(PULL TO RELEASE)
KEKU SLIDER FASTENER
(4) PER PANEL
(SLIDE UP TO RELEASE)
Figure D
#8 X 3/4 PAN HEAD PHILIPS
(2) PER BRACKET
#10 X 7/8 PAN HEAD PHILIPS
(4) PER LEG ASSEMBLY BRACKET
Form No. INST-VS0029
Figure C
2