Table of Contents
Advertisement
Quick Links
Bourne
Recommended Tools
Screw Gun
#3 Phillips Head Bit
Package Contents
Top
Metal Legs
(Qty. 2)
Wood Leg Caps
(Qty. 4)
Step 1
Assemble H-Frame
• Insert Cross Bar into Side
Rail brackets.
• Fasten together using
1/4-20 x
1
" flat head bolts.
/
2
Cross Bar
Notice To Installers: Failure to comply with installation instructions will compromise the safety, durability and performance of this product, which may risk injury to the user of this
product and/or diminish the product life cycle. Jasper Group assumes no liability in these instances.
#3 Phillips Screw Driver
H-Frame
Foot Rails
jsifurniture.com
812.482.3204
800.457.4511
812.482.1548
Level
Metal Rails
(Qty. 2)
Wood Rails
(Qty. 2)
H-Frame Rails
& Cross Bar
(Qty. 3)
Side Rail Bracket
225 Clay Street / PO Box 231
O
Jasper, Indiana 47546
F
Installation Instructions
Metal Table Assembly
Hardware Used
" Pan Head Bolts
1/4-20 x
1
/
2
" Flat Head Bolts
1/4-20 x
1
/
2
#10 x 1 " Flat Head Screws
" Truss Head Screws
#10 x 2
1
/
4
1/4-20 x
Page 1 of 4
1
"
/
Bolts
2
Form No. INST-BU004
5/1/16
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for JSI Bourne
Summary of Contents for JSI Bourne
-
Page 1: Installation Instructions
Installation Instructions Bourne Page 1 of 4 Metal Table Assembly Recommended Tools #3 Phillips Screw Driver Screw Gun #3 Phillips Head Bit Level Package Contents Hardware Used Metal Rails ” Pan Head Bolts 1/4-20 x (Qty. 2) ” Flat Head Bolts... - Page 2 Installation Instructions Bourne Page 2 of 4 Metal Table Assembly Step 2 Step 3 (continued) Position Legs in Place on Top Attach Metal Rails to Legs • Flip top upside down and lay on a flat • Fasten all four Metal Rails to Legs smooth surface.
- Page 3 Installation Instructions Bourne Page 3 of 4 Metal Table Assembly Step 6 Step 7 Tighten Metal Rail Tighten H-Frame (continued) Fasteners to Legs Fasteners to Legs • After Legs have been securely fastened to • After Legs have been securely fastened...
- Page 4 Installation Instructions Bourne Page 4 of 4 Metal Table Assembly Step 10 Attach Wood Leg Caps (continued) • Carefully flip table upright. • Attach wood leg caps to metal legs by engaging clip in cap into metal leg. Slide cap fully upward, then press bottom of cap firmly for hook &...
Need help?
Do you have a question about the Bourne and is the answer not in the manual?
Questions and answers