R-Net Trip Codes; Supported R-Net Parameters - Mo-vis Foot Control Omni Installation Manual

other wheelchair functionalities, such as seating positions, etc., then you
have to select Profiles/Modes.

R-net trip codes

TROUBLE:
When a fault is detected by the device, an R-net trip code will be
generated. The trip code will be shown on the joystick (if it is present
and equipped with a graphic display). The trip code will also be
logged in the R-net system and can be investigated using the R-net PC
Programmer.
If you want to learn more about trip codes, see the Curtiss-Wright
manual | SK77981-14 R-net Technical Manual.

Supported R-net parameters

The following R-net parameters of the wheelchair electronics may or may not
be supported by the mo-vis joysticks.
PARAMETER
Momentary screens
52
SUPPORTED
Global parameter
N
Foot Control Installation manual
FIRMWARE
VERSION