Mo-vis Foot Control Omni Installation Manual page 36

For a Multi Joystick, there is the additional option to program the yellow tip
on the sensor itself. This parameter is called Specific Input Setting.
For more information about the Twister Pro and its safety switch
functionalities, please refer to the Twister Pro Installation manual.
NOTE: You have to program the safety switch both here in the mo-vis
Configurator and in the LiNX Access programmer.
Another parameter that you can set is the Debounce Timer. This will be
applied to all connected buttons except for the on/off button!
SETTING
Debounce The input button has to be
timer
pressed for longer than the
debounce timer, before it is
seen as an input. It can be
useful to increase this timer,
in case the user has a tremor.
Auditive feedback
SETTING
Error/warning
beep
Foot Control Installation manual
DESCRIPTION
DESCRIPTION
When the control goes into
error or warning, it will show
PARAMETERS
50 mS
2500 mS
10 mS
PARAMETERS
Off No beep when
in error/warn-
Min./Default
Max.
Step
35