Mo-vis Foot Control Omni Installation Manual page 30

For a Multi Joystick, there is the additional option to program the yellow tip
on the sensor itself. This parameter is called Specific Input Setting.
Another parameter that you can set is the Debounce Timer. This will be
applied to all connected buttons except for the on/off button!
SETTING
Debounce The input button has to be
timer
pressed for longer than the
debounce timer, before it is
seen as an input. It can be
useful to increase this timer,
in case the user has a tremor.
Input settings for joysticks with R-net connection
For joysticks with an R-net connection, you can program both the yellow and
the red tip.
Yellow tip:
SETTING
Switch
type
Foot Control Installation manual
DESCRIPTION
DESCRIPTION
Specification of
the button con-
nected to the yel-
low tip.
50 mS
2500 mS
10 mS
PARAMETERS
None
Normal open
PARAMETERS
Min./Default
Max.
Step
This input will be
ignored.
You can connect a stan-
dard button or a safety
29