Omni Joystick Connection; Purpose; Connectivity - Mo-vis Foot Control Omni Installation Manual
Hide thumbs
Also See for Foot Control Omni:
- Installation manual (37 pages) ,
- User manual (15 pages) ,
- User manual (103 pages)
Table of Contents
Advertisement
Omni Joystick Connection
Purpose
A mo-vis Omni Joystick has a cable with a SUB D9 connector and a 3.5 mm
jack connection. They can be plugged in directly to the electronics of the
wheelchair. The joystick then controls the wheelchair in all its functions
(driving, electric gears, lights ...).
Connectivity
The Omni Joystick allows you to connect to a wheelchair with a Curtiss-
Wright Omni or Omni2 display.
Optional mo-vis adapters allow you to connect the Omni Joystick to a
wheelchair with:
•
DX: Joystick Interface Omni-DX (P002-31)
Easy Rider: Joystick Adapter Omni-Easy Rider (M002-90)
•
•
Otto Bock Curtis electronics: Joystick Interface Omni-Otto Bock Curtis
(P002-37)
NOTE:
Third-party adapters might also be compatible with the mo-vis
Omni Joysticks.
48
Foot Control Installation manual
Advertisement
Table of Contents
Need help?
Do you have a question about the Foot Control Omni and is the answer not in the manual?
Questions and answers