Mo-vis Foot Control Omni Installation Manual page 29

SETTING
Switch
Specification of the button
type connected to the yellow tip.
For more information about the Twister Pro and its safety switch
functionalities, please refer to the Twister Pro Installation manual.
NOTE: You have to program the safety switch both here in the mo-vis
Configurator and in the R-net Programmer.
28
DESCRIPTION
NOTE: It is only useful
to program this as a
safety switch with an
Omni2 display.
PARAMETERS
None
Normal
open
Safety
switch
Foot Control Installation manual
This input will be
ignored.
You can connect
a standard but-
ton or a safety
switch (e.g. mo-
vis Twister Pro).
When the safety
switch fails, it will
not be detected
and no warning
is given.
You must con-
nect a safety
switch. When
the safety switch
fails, a warning
will be given.