R-Net Parameters - Mo-vis Foot Control Omni Installation Manual

To disconnect the communication cables, firmly hold the connector housing
and pull the connectors apart.
NOTE:
Pull the connector apart in a straight line to not damage the
connection pins.

R-net parameters

Some R-net parameters need to be set for correct usage of the mo-vis R-net
joysticks. For this we refer to the Curtiss-Wright manual SK77981-14 | R-net
Technical Manual | Chapter 3 - Progamming
R-net (Ch. 3 - 4.4):Profile Management > Input Device Type:
• In most cases, this parameter needs to be set to Universal for all mo-vis
joysticks.
• In combination with certain other devices (e.g. Scoot Control), it is
advised to set this parameter to JSM. Please refer to the Installation
manual of the other devices for more information.
NOTE:
refer to the Curtiss-Wright manual SK77981-14 | R-net Technical
Manual | Chapter 3 - Programming to install as Input Device
Subtype.
R-net (Ch. 3 - 7.5): Controls > Global > Profile Button: the default setting
of this parameter is Profiles. If you want access to the modes for control of
Foot Control Installation manual
If you have several input devices of the same type, please
51